Extron electronic DXP DVI PRO manual Example 6 Recalling a Preset, Enter Save Preset Mode

2.Press and hold the Preset button until it blinks (approximately 2 seconds). (In the example below, preset 2 was not assigned in a previous example.)

Preset Assigned

Press and hold the Preset button until it blinks.

PRESET		PRESET
	2 seconds	All buttons with assigned presets
		light.

If you then save the configuration to a lit preset number, the configuration data at that preset location will be overwritten.

			INPUTS
1	2	3	4	5	6	7	8

No Preset Assigned

Figure 39. Enter Save Preset Mode

3.Press and release the input or output button for the desired preset.

C O N T R O L

Press and release the Input 1 button.

The button blinks to indicate that this preset number is selected but not saved.

			INPUTS
1	2	3	4	5	6	7	8

ENTER PRESET VIEW ESC

•The Enter button blinks to indicate the need to save the preset.

•The Preset button continues to blink.

Figure 40. Select the Preset

4.Press and release the Enter button. The current configuration is now stored in the selected memory location.

Press the Enter button to save the preset.

C O N T R O L

ENTER PRESET VIEW ESC

The Enter and Preset buttons return to unlit or background illumination.

All input buttons return to unlit or background illumination.

Figure 41. Press the Enter Button

Example 6: Recalling a Preset

In the following example, a preset is recalled to become the current configuration. The steps show the front panel indications that result from your action.

1.Press and release the Esc button.

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button blinks once.

Figure 42. Clear All Selections

DXP DVI, DXP DVI Pro, and DXP HDMI Series • Operation 30