Extron electronic DXP DVI PRO manual Rmm XRpr, Rmm XSpr, Rmm07Spr03, E X*X**01*1VC

Command	ASCII Command			Response	Additional Description
	(Host to Switcher)			(Switcher to Host)
Save, Recall, and Directly Write Global and Room Presets (continued)
Recall room preset	X^*X*.			Rmm X^•Rpr X*]	Command character is a
					period.
Directly write a room preset	E+X^*X* P X@*X#!X@*X#%X@*X#$...X@*X#&}
				Rmm X^•Spr X*]	Enter as many ties as are
					valid for this model. Tie all (!),
					tie RGB (&), tie video (%), and
					tie audio ($) commands are
					all valid.
Example:
		Esc	+7*3P1*7&3*5$4*5%6*6!
				Rmm07•Spr03]	Brackets are shown to

separate ties for clarity only. Create preset 3 for room 7, which ties video Input 1 to Output 7, audio Input 3 to Output 5, RGB Input 4 to Output 5, and video and audio Input 6 to Output 6.

View Ties and Presets

NOTE: The & view tie command for RGB and the % view tie command for video can be used interchangeably on the matrix switchers.

View video and audio output	X#!	X@]
tie
Example:	4!	7]
View RGB output tie	X#&	X@]
Example:	7&	2]
View video output tie	X#%	X@]
Example:	3%	6]
View audio output tie	X#$	X@]
View video room preset	E X^*X**01*1VC}	X@•X@•...•X@•Vid]
configuration

View Input X@ to which Output X# is tied.

Output 4 is tied to Input 7 video and audio.

Output 7 is tied to Input 2 RGB.

Output 3 is tied to Input 6 video.

Output X# is tied to audio Input X@.

Show room X^, preset X* video configuration. Show input X@ tied to 16 sequential outputs assigned to room X^, starting from Output 1.

NOTE: For all DXP models, the recommended starting output number for this command is 1.

NOTE: X@ = Input number (for ties)	0 – maximum number of inputs for your model
X# = Output number	1 – maximum number of outputs for your model
X^ = Room number (for room presets)	Each room can have up to 10 room presets (X*) assigned.
X* = Room preset number	00 – current ties for the room in view mode, 10 maximum
X1# = Name	Name of preset, room, input, or output
	• 12 characters maximum for input, output, and global preset names
	• 11 characters maximum for room names
	• Upper- and lowercase alphanumeric characters are valid.
DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control		60