Extron electronic DXP DVI PRO manual Date/Time Settings Fields

Date/Time Settings Fields

The fields in the Date/Time Settings section provide a location for viewing and setting the time functions.

Figure 108. Date/Time Settings Fields

Change the date and time settings as follows:

1.Click the drop-down box for the desired variable. The variables are month, day, year, hours, minutes, am or pm, and (time) zone. A drop-list appears (the Month list is selected in figure 108).

2.Click and drag the slider or click the Scroll Up button or Scroll Down button until the desired variable is visible.

3.Click on the desired variable.

NOTES: • If setting the time, set the local time, then select the offset from

Greenwich Mean Time (GMT) from the Zone menu.

•The Zone field identifies the standard time zone that has been selected and displays the amount of time, in hours and minutes, that the local time varies from the GMT international time reference.

4.Repeat steps 1 through 3 for other variables that need to be changed.

5.Select the appropriate daylight saving time radio button. To turn off daylight saving time, select Off (located to the left of the USA button).

NOTE: When daylight savings time is enabled, the switcher updates its internal clock between standard time and daylight savings time in the spring and fall on the date that the time change occurs in the United States of America and parts of Europe and Brazil. When daylight savings time is turned off, the switcher does not adjust its time reference.

6.Click the Submit button at the bottom of the Date/Time Settings section to implement your selections.

DXP DVI, DXP DVI Pro, and DXP HDMI Series • HTML Operation 111