Extron electronic DXP DVI PRO manual X1X1X1&X1*X$, Firmware Version Queries

Command	ASCII Command	Response	Additional Description
	(Host to Switcher)	(Switcher to Host)
Information Requests (continued)
Request part number	N	60-nnn[n]-01]	Show the DXP part number:
		DXP 44 DVI = 43-265-01	DXP 44 HDMI = 60-880-01
		DXP 88 DVI = 43-266-01	DXP 48 HDMI = 60-1010-01
		DXP 44 DVI Pro = 60-875-01	DXP 84 HDMI = 60-881-01
		DXP 48 DVI Pro = 60-1009-01	DXP 88 HDMI = 60-882-01
		DXP 84 DVI Pro = 60-876-01
		DXP 88 DVI Pro = 60-877-01

Firmware Version Queries:

NOTE: There are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware, which is the overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the latest optional Extron firmware update, which is available at www.extron.com.

Query controller firmware	Q	X2!]
version
Example:	Q	1.23]
Query controller firmware	0Q	X2! – X2@ – X2@]
version (verbose)

Example:	0q	(See below.)
Response:		* Indicates the Version Running
	Description

View firmware version X2! to the second decimal place. The factory-installed controller firmware version is 1.23. Provide a detailed status

of the Ethernet protocol firmware, the controller firmware, and any firmware upgrade. The firmware that is running is marked by

an asterisk (*). A caret (^) indicates that the firmware has a bad checksum or an invalid load. ?.?? indicates that firmware is not loaded.

Upload Date and Time

3.03-1.13(1.81-DXP Series -Wed, 16 Jan 2003 00:00:00 GMT)-1.13*(1.81-DXP Series -Thu, 02 Sep 2011 18:42:05 GMT)

	Ethernet DXP Firmware Version		Updated Firmware Version
Request system status		S	X1^•X1^•X1&•X1*•X$]
			Display voltages X1^, internal
			temperature X1&, fan speed
			X1* (rpm), and power supply
			status X$.

Example:S

3.3 V Power	Internal	Power supply
System at 3.29	Temperature	is on and Ok.

3.29•4.85•+077.80•03750•1

5 V Power	System	Fan 1 rotating
at 4.85 V		at 3750 RPM

NOTE: X$ = Power supply status		0 = not OK, 1 = OK
X1^ = Voltage		Positive or negative voltage and magnitude of internal power supplies
X1&	= Temperature	Degrees Fahrenheit
X1*	= Fan speed	In RPM
X2!	= Firmware version number to second decimal place (n.nn)

X2@ = Verbose firmware version–description–upload date and time

DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control 65