Extron electronic DXP DVI PRO manual Command and Response Table for IP-Specific SIS Commands

Command and Response Table for IP-Specific SIS Commands

Command	ASCII Command	Response	Additional Description
	(Host to Switcher)	(Switcher to Host)
IP Setup Commands
Set matrix name	E X3) CN}	Ipn•X3)]	X3) can be up to 24
			alphanumeric characters or
			hyphens (-). The last character
			cannot be a hyphen.
Read matrix name	E CN}	X3)]
Reset matrix name to factory	E•CN}	Ipn•X3)]
default
Set time and date	E X3@ CT}	Ipt X3@]
Read time and date	E CT}	X3#]
Set GMT offset	E X3$ CZ}	Ipz X3$]	In the command, the divider
			between hours and minutes
			can be a colon or a period. In
			the response, it is a colon.
Example:	E 8.0CZ}	Ipz+08:00]
Read GMT offset	E CZ}	X3$]
Set Daylight Saving Time	E X3% CX}	Ipx X3%]
Read Daylight Saving	E CX}	X3%]
Time
Set IP address	E X3^ CI}	Ipi X3^]
Read IP address	E CI}	X3^]
Read hardware address	E CH}	X3&]
Read number of open	E CC}	Icc X3*]
connections
Set subnet mask	E X3^ CS}	Ips X3^]
Read subnet mask	E CS}	X3^]
Set gateway IP address	E X3^ CG}	Ipg X3^]
Read gateway IP address	E CG}	X3^]
Set administrator password	E X3( CA}	Ipa•X3(]
Read administrator password	E CA}	X3(]
Reset (clear) administrator	E•CA}	Ipa•]
password
Set user password	E X3( CU}	Ipu•X3(]
Read user password	E CU}	X3(]
Reset (clear) user password	E•CU}	Ipu•]
Set mail server, domain name	E X3^,X4),X3( CM}	Ipm X3^,X4),X3(]
Read mail server, domain name	E CM}	X3^,X4),X3(]
Set e-mail recipient	E X4!,X4@ CR}	Ipr X4!,X4@]	This command sets the
			recipient of the e-mail. To
			receive e-mail notifications,
			you must then set the events
			that the switcher reports,
			using one or more separate
			Set e-mail events (EM)
			commands (see the example
			below).
Example:	E 72,Jsmith@folklore.netCR}
		Ipr72,Jsmith@folklore.net]
View e-mail recipient	E X4! CR}	X4@]	Show e-mail recipient address
			X4@ for e-mail account X4!.

DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control 70