Extron electronic DXP DVI PRO Example 3 Removing a Tie from a Set of Ties, Clear All Selections

Example 3: Removing a Tie from a Set of Ties

In the following example, an existing tie is removed from the current configuration. The steps show the front panel indications that result from your actions.

NOTE: This example assumes that you have performed examples 1 and 2.

1.Press and release the Esc > button.

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button blinks once.

Figure 25. Clear All Selections

2.To select only audio for the tie, press and release the Video and Audio buttons as necessary until the Audio button is lit and the Video button is off.

I / O

VIDEO AUDIO

Press the Video button to toggle video off.

The button is unlit or background illuminated when deselected.

Press the Audio button to toggle Audio on. The button lights red when selected.

Figure 26. Select Audio Only

3.Press and release the input 5 button.

Press and release the Input 5 button.

The button lights red.

The Output 3, Output 4, and Output 8 buttons light red to indicate the audio ties created in example 1.

INPUTS

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8

OUTPUT

The Output 1 button does not light green to indicate the tie created in example 2 because that tie is video only.

Figure 27. Select an Input

4.Press and release the Output 4 button.

Press and release the Output 4 button.

The button blinks red to indicate the pending change: audio input will be untied.

1	2	3	4	5	6	7	8	CONTROL
								ENTER PRESET	VIEW	ESC
			OUTPUT

The Enter button blinks green to indicate the need to confirm the change.

Figure 28. Deselect the Output

DXP DVI, DXP DVI Pro, and DXP HDMI Series • Operation 24