Extron electronic DXP DVI PRO X* Zp, Hdcp Authorization DXP DVI Pro and Hdmi models only, Resets

Command	ASCII Command	Response	Additional Description
	(Host to Switcher)	(Switcher to Host)

HDCP Authorization (DXP DVI Pro and HDMI models only)

NOTE: If the source requires HDCP authentication, ensure that HDCP authorization is set to On (the default).

HDCP authorization on	E E X!*1HDCP}	HdcpE X!*1]
HDCP authorization off	E E X!*0HDCP}	HdcpE X!*0]
Query HDCP authorization	E E X! HDCP}	X2$ ]
status		In verbose mode 2
		or 3:
		HdcpE X!*X2$]

Set HDCP authorization to On for input X!.

Disable HDCP for input X!.

Show HDCP authorization status X2$ for input X!.

Resets

Reset global presets	E ZG}
and names
Reset an individual global	E X& ZG}
preset
Reset all mutes	E ZZ}
Reset room map	E ZR}
Reset individual room	E X^ ZR}
Reset all room presets and	E ZP}
names
Reset individual room preset	E X^*X* ZP}
and name
Reset whole switcher	E ZXXX}
Absolute resets	E ZQQQ}

EZY}

Zpg]	Clear all global presets and
	their names.
Zpg X&]	Clear global preset X&.
Zpz]	Unmute all audio or video.
Zpr]	Clear all room definitions.
Zpr X^]	Delete room X^.
Zpp]	Clear all room presets and
	names.
Zpp X^*X*]	Clear an individual room
	preset and name.
Zpx]	Clear all ties and presets.
Zpq]	Similar to the Reset whole
	switcher command,
	plus clear the IP address
	to 192.168.254.254
	and subnet mask to
	255.255.000.000.
Zpy]	Reset all settings except IP
	and gateway address, subnet
	mask, unit name, DHCP
	setting, and port mapping
	(Telnet, web, and direct
	access). This is recommended
	for after a firmware update.

Information Requests

Information request	I	V X1$ X X1%•A X1$ X X1%]
			V X1$ X X1% is the video matrix
			size. A X1$ X X1% is the audio
			matrix size.
Example:	I	V4X8•A4X8]	The matrix consists of four
DXP 48 DVI Pro			video and audio inputs by
DXP 48 HDMI			eight video and audio outputs.

NOTE: X! = Input number	1 – maximum number of inputs for your model
X^ = Room number (for room presets)	Each room can have up to 10 presets (X&) assigned.
X& = Global preset number	00	– 32. 00 = current preset
X* = Room preset number	00	– current ties for the room in view mode, 10 maximum
X1$ = Total inputs	Total number of inputs for this switcher
X1% = Total outputs	Total number of outputs for this switcher
X2$ = HDCP authorization status	1 = HDCP authorization is on (default); 0 = authorization is off.

NOTE: If the source requires HDCP authentication, ensure that HDCP authorization is set to On (default).

DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control 64