Enter your PIN code (or 0000 if no PIN code has been set).

Chapter 5: Setting up your TV

Viewing the system status

To view the system status:

1 From the Setup menu, highlight Installation and press T. A new set of Installation menu icons will appear.

2 Open the System Status menu, highlight System Information, and press T.

3 Press C c to scroll through the menu bar to select the Software Version and view the related information.

To close the screen and return to the Installation menu:

Highlight Done and press T.

To return to normal viewing:

Press O.

Reset Factory Defaults

To reset all settings and channels to their factory default values:

1 From the Setup menu, highlight Installation and press T. A new set of Installation menu icons will appear.

2 Open the System Status menu, highlight System Information, and press T.

3 Press C c to scroll through the menu bar to select Factory Defaults.

4

5 Highlight Yes and press T. The TV will turn off automatically after a few seconds. After the TV turns off, unplug the TV power cord and then plug it in again to complete the reset process.

To cancel the reset:

Highlight No and press T.

Selecting the Power-On Mode

You can select either Power-Savingor Fast mode.

Power-Savingmode keeps power consumption in standby mode to below 3W. As a result, it takes a bit longer for the TV to turn on.

Fast mode increases power consumption in standby mode. As a result, the TV will turn on more quickly. While in Fast mode, the yellow LED on the front of the TV will be lit.

To set the Power-On Mode feature:

1 From the Setup menu, highlight Power-On Mode and press c.

2 Press Bor bto select either Power-Savingor Fast, and press T.

To return to normal viewing:

Press O.

33

Page 33
Image 33
Toshiba 37CV510U, 32CV510U manual Viewing the system status, Selecting the Power-On Mode, Reset Factory Defaults