D1260/D1260B Owner's Manual Part II: System Commands - PERIMETR DELAY ? (COMMAND + 3)
PERIMETR DELAY ? (COMMAND + 3)
Turn On the Perimeter With Delays
Description
In residential systems this function allows you to only arm the perimeter and exit through a door programmed for exit delay. The interior of the building remains disarmed. People or pets are free to move throughout the interior of the premises.
This function is also useful in commercial systems when you are working before or after business hours and wish to have the perimeter armed. Other system users can enter through doors programmed for entry delay, which will start the entry delay sounder and countdown.
Using Perimeter Delay
1.Interior points are not armed with this command and may remain faulted while arming with COMMAND 3.
2.Press the COMMAND key.
The display shows *System Command*.
3.Press the 3 key.
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the MENU> soft key to enter the
Command Menu,
then press NEXT> soft key repeatedly.
until you reach the PERIMETR DELAY ?> prompt, then press the adjacent soft key.
4.The display shows Exit now! # (# = exit delay time remaining).
After the exit delay expires, Perimeter On Delayed is displayed.
5.To disarm your security system, enter your personal passcode and press ENTER.
The display then returns to idle text.
Bosch Security Systems 9/04 50410D | 23 |
