D1260/D1260B Owner's Manual Part I: Security system basics - View Faulted or Bypassed Points
This manual uses the default idle state displays for examples of these idle states. Your security company may have programmed custom text for the idle displays in your system. The custom text and the default text for the three system idle displays follow.
| Default Text | Custom Text |
Area Name Text |
| _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
Appears on the top line of the display |
|
|
|
|
|
Throughout this manual, all examples of “AREA # NAME TEXT” will use “AREA 1 WAREHOUSE.” The actual name of Area 1 will differ depending on the specifics of your system.
Area Is On Text
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The Silence> soft key is only shown when the keypad buzzer is active
Area Off Text |
|
|
| _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
|
|
| ||
Indicates the area is turned off |
|
|
|
|
|
|
|
| |
(disarmed). |
|
|
|
|
armed. |
|
|
|
|
|
|
|
|
|
Area Not Ready Text |
|
| _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |
Indicates that the area is turned off, |
|
|
|
|
but not ready to arm. |
|
|
|
|
|
|
|
|
|
View Faulted or Bypassed Points
To properly arm your system, all the doors and windows in the system must be in the normal (not faulted) condition. Viewing the faulted points helps you find faulted points and correct them so proper arming is possible.
Your keypad offers two ways of displaying faulted and bypassed point information. The first causes the faulted or bypassed point information to scroll automatically through the display. The second allows you to manually scroll through each individual point description.
To automatically scroll faulted or bypassed points
1.Ensure your keypad shows idle text.
2.Press any number key. The text for Area 1 is displayed first followed by the number (#) of faulted points on the next line
3.The display changes to show the point text description of the faulted points. If there is more than one faulted point, the display will automatically cycle through all of them before returning to idle text.
These displays scroll at the rate of 3 seconds each.
The View Points> soft key may be displayed on the third line of the keypad if there are faulted points.
Bosch Security Systems 9/04 50410D | 9 |
