D1260/D1260B Owner's Manual Part II: System Commands - Special Alerts (COMMAND + 7 and COMMAND + 9)
4.When exit delay time expires and the system turns on, the display shows:
5.When performing a COMMAND 8 and no points are faulted or if the points return to normal before the exit delay time expires, the system is turned on as in COMMAND 3.
6.To disarm, enter your personal passcode and press
ENTER.
Special Alerts (COMMAND + 7 and COMMAND + 9)
Description
Commands 7 and 9 can be programmed to respond to a choice of numerous situations that may need immediate attention. They may also be used to send a silent alarm to your security company without sounding an alarm signal on the premises. Check with your security company for the options they offer.
Using COMMAND 7:
1.The display shows disarmed idle text.
Press the COMMAND key. The display shows *System Command*.
2.Press the 7 key.
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the USER CMD 7 ?> prompt, press its adjacent soft key.
Press ENTER.
30 | Bosch Security Systems 9/04 50410D |
