D1260/D1260B Owner's Manual Part II: System Commands - MASTER ARM INST ? (COMMAND + 1 + 1)
13.To disarm your security system, enter your personal passcode and press ENTER.
14.The display changes to show that all the areas are disarmed.
Depending on what areas are armed or areas that you have authority, 12345678 may or may not appear.
The display returns to idle text.
MASTER ARM INST ? (COMMAND + 1 + 1)
Use this function to turn on a single area, both perimeter and interior without delays. When entering COMMAND 11, remember that the second 1 must be pressed within 2 seconds after pressing the first 1.
The menu entry MASTER ARM INST> is different in that it allows all or selected areas to be armed instantly.
COMMAND 11 does not comply with SIA CP-01 Standard.
Using the COMMAND + 1 + 1 shortcut will only instantly arm the area where the keypad has been assigned. Example, if the D1260 is assigned to Area 1, only Area 1 will be armed when COMMAND + 1 + 1 is pressed.
1.The display shows disarmed idle text.
2.Press the COMMAND key. The display shows *System Command*.
3.Press the 1 key. Now press the 1 key again.
4.The keypad display shows AREA 1 WAREHOUSE All On Instant.
5.To disarm your security system, enter your personal passcode and press ENTER.
Bosch Security Systems 9/04 50410D | 21 |
