D1260/D1260B Owner's Manual
This system includes a telephone line seizure feature. The system may be programmed to communicate with a central monitoring station to report system events. You will not be able to use your phone while the system is communicating with the central monitoring station. In the unlikely event that the central station is not able to receive the report, your phone may be unavailable for up to 20 minutes while the panel makes additional communication attempts.
Some commands listed below may not be available. Contact your security company for more information.
Contents
Introduction | 5 |
Your Keypad | 5 |
About This Owner’s Manual | 6 |
Part I: Security system basics | 7 |
Using the keypad | 7 |
Command center keys | 7 |
Points 8 |
|
What is a Point? | 8 |
Controlled Points | 8 |
8 | |
Your Custom Display | 8 |
View Faulted or Bypassed Points | 9 |
To automatically scroll faulted or bypassed points | 9 |
Warning Displays and Tones | 10 |
Keypad Quiets for Keystrokes | 10 |
Priority of Events | 10 |
Fire Alarms | 11 |
Silencing Fire Alarms | 11 |
Burglary Alarms | 12 |
Silencing Burglary Alarms | 12 |
Fire Trouble and Fire Supervisory Events | 13 |
Silencing Fire Trouble and Fire Supervisory conditions 13
Special Fire Trouble and Fire Supervisory Display ....13
Viewing Fire Trouble and Fire Supervisory conditions
13 |
|
13 | |
Silencing | |
Special System Trouble Display | 13 |
Cleared Events Are Not Lost | 13 |
Entry Delay Tone and Display | 14 |
Exit Delay Tone and Display | 14 |
Keystroke Checking Tones | 14 |
Silencing an Alarm | 14 |
To SILENCE an alarm: | 14 |
How Your System Reports Alarms | 14 |
Part II: System Commands | 15 |
Entering a Passcode | 15 |
Turning On the System (Arming) | 16 |
To Turn Your Security System On (Arm): | 16 |
Turning Off the System (Disarming) | 16 |
To Turn Your Security System Off (Disarm): | 16 |
Turning On the System (Arming) With a Duress |
|
Passcode | 16 |
Turning On the System (Arming) With Doors or |
|
Windows Open | 17 |
MASTER ARM ? (COMMAND + 1) | 19 |
Description | 19 |
Using Master Arm: | 19 |
Master Arming all Areas | 20 |
MASTER ARM INST ? (COMMAND + 1 + 1) | 21 |
PERIMETR INST (COMMAND + 2) | 22 |
Turn On the Perimeter With No Delays | 22 |
Using Perimeter Inst: | 22 |
PERIMETR DELAY ? (COMMAND + 3) | 23 |
Turn On the Perimeter With Delays | 23 |
Silence the Trouble Sounder & Clear Trouble Display | |
(COMMAND + 4) | 24 |
Description | 24 |
Using COMMAND 4: | 24 |
VIEW MEMORY ? (COMMAND + 4 + 0) | 24 |
View Event Memory | 24 |
Using View Memory: | 24 |
WALK TEST ? (COMMAND + 4 + 4) | 25 |
Walk Test | 25 |
RESET SENSORS ? (COMMAND + 4 + 7) | 27 |
Reset Sensors | 27 |
Using Reset Sensors: | 27 |
WATCH MODE ? (COMMAND + 6) | 28 |
Watch Mode | 28 |
Entering Watch Mode: | 28 |
Exiting Watch Mode: | 28 |
PERIMETR PART ? (COMMAND + 8) | 29 |
Partially Turn On the Perimeter | 29 |
Using Perimetr Part: | 29 |
2 | Bosch Security Systems 9/04 50410D |
