D1260/D1260B Owner's Manual Part III: Advanced Commands - DEFAULT TEXT ? (COMMAND + 5 + 7)
5.If the card you are trying to add to the system already exists, an error tone sounds and the display changes to Card already exists. Please try again.
If 20 seconds elapse without pressing a key returns the display to idle text. Pressing the <Exit soft key exits out of this function and returns the display to the main Add / Change User display.
Then the display returns to Present card to card reader now.
Present the card to the reader to continue or press the <Exit soft key to exit out of this function and return the display to idle text.
6.If the card is accepted, the display changes to either Card added. or Card changed if the card already exists in your system.
Pressing the <Exit soft key exits out of this function and returns the display to the main Add / Change User display.
Pressing the Next> soft key exits out of this function and returns the display to Add/Change Passcode depending on if a passcode already exists for the user.
DEFAULT TEXT ? (COMMAND + 5 + 7)
This function allows the current state of the area for 3 seconds before returning to idle text.
1.Ensure your keypad shows idle disarmed text.
2.Press the COMMAND key. The display shows *System Command*.
3.Press the 5 key and then the 7 key.
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the DEFAULT TEXT ?> prompt, press its adjacent soft key.
60 | Bosch Security Systems 9/04 50410D |
