Bosch Appliances D1260B Fire Trouble and Fire Supervisory Events, Special System Trouble Display

D1260/D1260B Owner's Manual Part I: Security system basics - Fire Trouble and Fire Supervisory Events

Fire Trouble and Fire Supervisory Events

When a fire trouble or fire supervisory condition occurs, your keypad emits three warble tones, then a pause (repeatedly).

The system displays the number of fire points that are in a trouble or supervisory condition as well as the point text of the affected points.

Silencing Fire Trouble and Fire Supervisory conditions

Pressing COMMAND 4 or the Silence> soft key silences the conditions. In addition to this, entering a personal passcode with the proper authority level silences the condition and disarms the panel if it was armed. If you wish to review these cleared troubles, using COMMAND 40 can do this.

Some systems may be programmed to automatically re-sound the keypad’s trouble tone after a period of time if the fire trouble or fire supervisory condition remains. Consult your security company for further information.

Special Fire Trouble and Fire Supervisory Display

If you silence the keypad or clear a trouble or supervisory condition for a Fire Point from the display and the fire point remains in trouble, Fire Trouble or Fire Supervisory appears in the keypad’s display. This remains in the display until the condition causing the trouble is cleared.

Some fire points, when tripped, will display FIRE TROUBLE for a preset amount of time. If no other fire activity is detected, this condition will automatically clear. If the condition remains or another fire detector is tripped, a fire alarm will occur.

Viewing Fire Trouble and Fire Supervisory conditions

After pressing COMMAND 4 or entering your passcode, the text of the fire point in trouble continues to automatically scroll through the display. Press View Points> soft key and then Next> soft key to scroll these displays manually if you wish. Events scroll in chronological order.

Non-Fire Trouble and Supervisory Events

When a trouble event occurs, your keypad may be programmed to emit three warble tones, then a pause (repeatedly).

If the system was armed the keypad display shows the number of non-fire trouble events or non-fire supervisory events and then custom text for each activated point.

Silencing Non-Fire Trouble and Supervisory Events

Pressing COMMAND 4 or the Silence> soft key silences the Trouble and/or non-fire Supervisory conditions. In addition to this, entering a personal passcode with the proper authority level silences a trouble and disarms the panel if it was armed. Press the View Points> soft key then the Next> soft key to scroll these displays manually. If you wish to review these cleared troubles, use COMMAND 40 to do this.

Special System Trouble Display

These displays appear on all keypads in the system. See Standard Displays for a description of each system trouble display. Entering your passcode, COMMAND 4 or pressing the Silence> soft key will silence a system trouble tone, but the System Trouble display will not clear until the faulted condition is corrected.

A system trouble display begins by sounding a trouble tone and then three seconds later the specific System Trouble Display is shown, such as Service AC Fail.

Some system may be programmed to not initiate a trouble tone during these conditions.

Cleared Events Are Not Lost

If you clear the alarms and troubles from the display, you can still view all the events that occurred since the last time the system was armed by using COMMAND 40 (View Event Memory).

Bosch Security Systems 9/04 50410D 13