D1260/D1260B Owner's Manual Part I: Security system basics - Silencing an Alarm
Entry Delay Tone and Display
When you enter an armed system through a point programmed for entry delay, the keypad emits a repeating warble tone and displays the following to remind you to turn off your security system.
If you fail to turn off the security system before the entry delay time expires, it may sound the burglary tone and may also send an alarm report to your security company.
Exit Delay Tone and Display
After you arm your system, the keypad emits a repeating beep tone, displays AREA 1 NAME TEXT is now arming… then
EXIT NOW! and counts down the exit delay time.
Keystroke Checking Tones
Valid Entry
If you press an appropriate key for the function or entry you desire, the keypad emits a muted beep tone, indicating it accepted your keystroke.
Invalid Entry
A flat buzz tone sounds when you perform a function that is not allowed or when the keypad has no information to display.
Silencing an Alarm
The audible alarm sounds for a specific period of time before it automatically shuts off. If an alarm occurs and you want to silence the siren before the time expires, simply enter your personal passcode and press
ENTER.
To SILENCE an alarm:
Enter your passcode and press ENTER.
How Your System Reports Alarms
Your security system may be programmed to automatically disconnect your telephones when sending reports to your security company. Once the report is completed, your security system returns the telephones to normal operation (check with your security company). Other methods of communicating alarm conditions are also available. Please consult your security company for services available in your area.
Your system makes repeated attempts to send reports to your security company.
In the event your security system fails to communicate, the keypad sounds a Trouble Tone and displays AREA 1 WAREHOUSE Comm Fail Route Grp1 (where the Route Group can be 1, 2, 3, or 4):
Notify your security company of the communications failure.
If your system uses telephone lines as its means of communication and telephone service is interrupted, your security system cannot send reports to your security company unless it has an alternate means of transmitting them.
14 | Bosch Security Systems 9/04 50410D |
