D1260/D1260B Owner's Manual Part I: Security system basics - Burglary Alarms
Burglary Alarms
Burglary alarms are the second priority. When a burglary point activates while your system is armed, your keypad emits a steady
The keypad display shows the number of burglary points activated, the point text then idle text.
If there is more than one point causing an alarm, the display will show each point for three seconds before showing the next one. When the last alarm is shown, the next display is idle text followed by the first alarm
3 seconds
|
| 3 seconds |
3 seconds |
| |
|
|
|
3 seconds
Silencing Burglary Alarms
Entering a personal passcode with the proper authority level silences a burglary alarm and disarms the system if it was armed.
The system will now display *Alarm Silenced*
and then the number of points in alarm ### Alarms and the custom text of all the points in alarm, in the order of occurrence.
Entering COMMAND 4 clears the scrolling point text from the display.
The *Alarm Silenced* message will continue to alternate with idle text as a reminder that it is still possible to view the text of the points in alarm by using the View Memory function. See VIEW MEMORY ? (Command 40) for more information.
To clear the event memory and remove the *Alarm Silenced* message from the display, press the Clear Display> soft key.
The display will show the instructions for clearing the message. Enter a valid passcode and press the Clear> soft key.
12 | Bosch Security Systems 9/04 50410D |
