Manuals / Bosch Appliances / Household Appliance / Home Security System

Bosch Appliances D1260B Silencing Fire Alarms, Bosch Security Systems | 9/04 | 50410D

Models: D1260B D1260

1 100

Download 100 pages 63.09 Kb

Page 11

Fire Alarms

D1260/D1260B Owner's Manual Part I: Security system basics - Fire Alarms

Fire Alarms

Fire alarms are the highest priority events. When a fire point activates, your keypad emits a pulsating high- pitched fire tone. Evacuate all occupants and investigate for smoke or fire. Ensure that all occupants know the difference between the burglary tone and the fire tone. The tone sounds for the time set by your security company.

Silencing Fire Alarms

Entering a personal passcode with the proper authority level silences a fire alarm and disarms the system if it was armed.

The system will now display *Alarm Silenced* on the second line and Clear Display> appears on the fourth.

Then the number of points in alarm (# FIRE ALARMS) and then the area text appears (AREA 1 NAME TEXT) followed by the custom text of all the points in alarm (SMOKE DETECTOR), in the order of occurrence.

If there is more than one point causing an alarm, the display will show each point for three seconds before showing the next one.

When the last alarm is shown, the next display is the idle text. The cycle is repeated until COMMAND 4 is pressed.

Your system may be programmed so that you cannot silence some fire alarms until the fire event clears. Entering COMMAND 4 clears the scrolling point text from the display.

The *Alarm Silenced* message will continue to alternate with idle text as a reminder that it is still possible to view the text of the points in alarm by using the View Memory function. See VIEW MEMORY ? (Command 40) for more information.

To clear the event memory and remove the *Alarm Silenced* message from the display, press the Clear Display> soft key.

The display will show the instructions for clearing the message. Enter a valid passcode and press the Clear> soft key.

If a fire trouble still exists after acknowledging the alarm, the display shows Fire Trouble.

3seconds

3seconds

3seconds

3 seconds

To remove this display, the fire point(s) must be returned to normal. If you wish to review cleared events, use COMMAND 40.

Bosch Security Systems 9/04 50410D

11

Image 11

Bosch Appliances D1260B owner manual Silencing Fire Alarms, Bosch Security Systems | 9/04 | 50410D

Contents

Owners Manual D1260/D1260BKeypad D1260/D1260B | Owners Manual ContentsBosch Security Systems | 9/04 | 50410D D1260/D1260B | Owners Manual | ContentsD1260/D1260B | Owners Manual Contents FiguresTables D1260B IntroductionYour Keypad D1260/D1260B | Owners Manual | ContentsBosch Security Systems | 9/04 | 50410D About This Owner’s ManualFigure 3: Using soft keys for display menus Figure 2: D1260/D1260B Digital KeypadPart I Security system basics Using the keypadCommand center keys Controlled Points PointsYour Custom Display What is a Point?Bosch Security Systems | 9/04 | 50410D View Faulted or Bypassed PointsPriority of Events Warning Displays and TonesTo manually scroll faulted or bypassed points Keypad Quiets for KeystrokesBosch Security Systems | 9/04 | 50410D Fire AlarmsSilencing Fire Alarms Bosch Security Systems | 9/04 | 50410D Burglary AlarmsSilencing Burglary Alarms Special System Trouble Display Fire Trouble and Fire Supervisory EventsNon-FireTrouble and Supervisory Events To SILENCE an alarm Silencing an AlarmEntry Delay Tone and Display Exit Delay Tone and DisplayEntering a Passcode Part II: System CommandsTo Turn Your Security System Off Disarm Turning On the System ArmingTurning Off the System Disarming To Turn Your Security System On ArmBosch Security Systems | 9/04 | 50410D Turning On the System Arming WithDoors or Windows Open Bosch Security Systems 9/04 50410D Bosch Security Systems | 9/04 | 50410D MASTER ARM ? COMMAND +Using Master Arm DescriptionBosch Security Systems | 9/04 | 50410D Master Arming all AreasBosch Security Systems | 9/04 | 50410D MASTER ARM INST ? COMMAND + 1 +COMMAND 11 does not comply with SIA CP-01Standard Command Menu then press NEXT> soft key repeatedly PERIMETR INST COMMAND +Turn On the Perimeter With No Delays Description Using Perimeter InstCommand Menu then press NEXT> soft key repeatedly PERIMETR DELAY ? COMMAND +Turn On the Perimeter With Delays Description Using Perimeter DelayVIEW MEMORY ? COMMAND + 4 + Description WALK TEST ? COMMAND + 4 +Using Walk Test Walk TestPress the MENU> soft key to enter the Command Menu Press NEXT> soft key repeatedly RESET SENSORS ? COMMAND + 4 +Reset Sensors Description Using Reset SensorsWATCH MODE ? COMMAND + PERIMETR PART ? COMMAND + Special Alerts COMMAND + 7 and COMMAND + Using COMMAND Terms Used in This Section Part III: Advanced CommandsAdvanced Commands Description BYPASS A POINT? COMMAND +Using Bypass a Point Command Menu Press NEXT> soft key repeatedlyBosch Security Systems | 9/04 | 50410D Description UNBYPASS A POINT? COMMAND + 0 +Using Unbypass a Point Command Menu Press NEXT> soft key repeatedlyBosch Security Systems | 9/04 | 50410D SEND REPORT ? COMMAND + 4+1 or 4+2Using Send Report DescriptionPress the MENU> soft key to enter the REMOTE PROGRAM ? COMMAND + 4 + Bosch Security Systems | 9/04 | 50410D Command Menu Press NEXT soft key repeatedlyPress the MENU> soft key to enter the Press ENTERBosch Security Systems | 9/04 | 50410D CHANGE TIME/DATE COMMAND + 4 +Command Menu Press NEXT> soft key repeatedly Press the MENU> soft key to enter theDescription DOOR CONTROL COMMAND + 4 +Using Door Control Command Menu Press NEXT> soft key repeatedlySecure Door Cycle DoorTable 3: Door Status Unlock DoorBosch Security Systems | 9/04 | 50410D Access LevelBosch Security Systems | 9/04 | 50410D CHANGE DISPLAY COMMAND + 4 +Brighten/Dim Display Show Continuous Time/DateEXTEND CLOSING COMMAND + 5 + If you prefer, you may use the Command Description CHG SKEDS ? COMMAND + 5 +Using Chg SKEDS Command Menu Press NEXT> soft key repeatedlyBosch Security Systems | 9/04 | 50410D Bosch Security Systems | 9/04 | 50410D TableSked Table DEL USER ? COMMAND + 5 + Press the MENU> soft key to enter the CHG RELAYS ? COMMAND + 5 +CHG PASSCODES ? COMMAND + 5 + Command Menu Press NEXT soft key repeatedlyBosch Security Systems | 9/04 | 50410D Using Chg PasscodesCommand Menu Press NEXT> soft key repeatedly Press the MENU> soft key to enter theBosch Security Systems | 9/04 | 50410D ADD/CHANGE USER COMMAND + 5 +Command Menu Press NEXT soft key repeatedly Press the MENU> soft key to enter theBosch Security Systems | 9/04 | 50410D Add/Change PasscodeUser 123 is used here as an example Bosch Security Systems | 9/04 | 50410D Bosch Security Systems | 9/04 | 50410D Add/Change LevelBosch Security Systems | 9/04 | 50410D Adding/Changing a User’s NameBosch Security Systems | 9/04 | 50410D Add/Change CardBosch Security Systems | 9/04 | 50410D Add/Change Sub-UserIDBosch Security Systems | 9/04 | 50410D DEFAULT TEXT ? COMMAND + 5 +Command Menu Press NEXT> soft key repeatedly Press the MENU> soft key to enter theFIRE TEST ? COMMAND + 5 + Bosch Security Systems | 9/04 | 50410D DISPLAY REV ? COMMAND + 5 +Bosch Security Systems | 9/04 | 50410D SERVICE MENU ? 9 + 9 + EnterCommand Menu Press NEXT> soft key repeatedly Press the MENU> soft key to enter theBosch Security Systems | 9/04 | 50410D Using View LogBosch Security Systems | 9/04 | 50410D Using Print LogUsing Display Rev Using Service Walk TestBosch Security Systems 9/04 50410D Using Default TextUsing Setup Bosch Security Systems | 9/04 | 50410D View Area Status Part IV: Multi-AreaUseBosch Security Systems | 9/04 | 50410D View Point StatusTable 5: Screen Area Definitions Bosch Security Systems | 9/04 | 50410D MOVE TO AREA ? COMMAND + 5 +Command Menu Press NEXT> soft key repeatedly Press the MENU> soft key to enter theBosch Security Systems | 9/04 | 50410D Turning On the SystemTurning on Selected Areas Turning on Multiple Areas with a PasscodeTurning on All or Selected Areas Turn On the Entire System Without DelaysFaulted Points in Other Areas Bosch Security Systems | 9/04 | 50410D Turning Off the SystemTurning Off Multiple Areas with a Passcode Turning Off Multiple Areas with Disarm AllBosch Security Systems | 9/04 | 50410D Turning Off Selected AreasBosch Security Systems | 9/04 | 50410D Passcode Worksheet AppendixSupplementary Information for Adding Passcodes User Authority LevelsSecurity Level? Access Authority Level OptionsUser Interface Bosch Security Systems | 9/04 | 50410D1 2 3__ __ __ User Passcode Worksheet User 000 toBosch Security Systems 9/04 50410D Bosch Security Systems | 9/04 | 50410D Bosch Security Systems | 9/04 | 50410D User Passcode Worksheet User 039 toBosch Security Systems | 9/04 | 50410D Page Bosch Security Systems | 9/04 | 50410D Bosch Security Systems | 9/04 | 50410D 132 133 134 135 136 137 138 139 140 141 142 143 Bosch Security Systems 9/04 50410D115 116 117 118 119 120 121 122 123 124 End RADXUSR1 Handler 125 126 127 128 129 130 131Bosch Security Systems 9/04 50410D Bosch Security Systems | 9/04 | 50410D Bosch Security Systems | 9/04 | 50410D Bosch Security Systems | 9/04 | 50410D Bosch Security Systems | 9/04 | 50410D Bosch Security Systems | 9/04 | 50410D Bosch Security Systems | 9/04 | 50410D User Passcode Worksheet BlankBosch Security Systems | 9/04 | 50410D Security System LimitationsUser Token Worksheet Blank Figure 6: Escape Route Fire Safety and EvacuationFigure 4: Smoke Detector Locations Plan View Figure 5: Smoke Detector Locations Elevation ViewExit Now Standard DisplaysSystem Command Perimeter DelaySystem Trouble Displays Service Point Bus 1 or Service Phone Line #1 or #2Service Printer Service D9210Security System Glossary Bosch Security Systems | 9/04 | 50410D Maintenance and ServiceHow to Clean the Command Center Your Alarm Company2004 Bosch Security Systems 50410D Fairport, NY Customer Service: 800Bosch Security Systems 130 Perinton Parkway Technical Support: 888