D1260/D1260B Owner's Manual Part III: Advanced Commands - UNBYPASS A POINT? (COMMAND + 0 + 0)
UNBYPASS A POINT? (COMMAND + 0 + 0)
Description
Unbypassing a point is a way to return a bypassed point to the security system so that it can once again respond to trouble and alarm conditions.
Using Unbypass a Point:
1.The display shows disarmed idle text.
Press the COMMAND key. The display shows *System Command*.
2.Press the 0 key twice.
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the UNBYPAS A POINT ?> prompt, press its adjacent soft key.
Press ENTER.
3.You will prompted for your passcode. It will appear on the display as asterisks (*).
4.The display changes to show Enter point number or press next key.
5.If digits are pressed, the display shows Enter point number: #. As soon as a digit key is pressed, the display changes to Entering point number:.
(# is the point number that was entered)
If you know the point number you wish to unbypass, enter the number and press the Enter> soft key or the ENTER button.
If you don’t know the number of the point you wish to unbypass, you can view the list of devices that can be unbypassed by pressing the Next> soft key.
Continuously pressing Next> scrolls through the available points that are currently bypassed.
When the point text of the point you wish to unbypass appears, press the Unbypass> soft key.
One of the following messages displays (FRONT DOOR is used here as an example):
•FRONT DOOR is not bypassed indicates the point is not bypassed and the option is given to bypass it.
•FRONT DOOR is now bypassed. indicates the point was successfully bypassed.
Bosch Security Systems 9/04 50410D | 35 |
