D1260/D1260B Owner's Manual Part II: System Commands - PERIMETR PART ? (COMMAND + 8)
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the WATCH MODE ?> prompt, press its adjacent soft key.
Press ENTER.
3.The display briefly shows Watch Mode is now off.
The display returns to show idle text.
PERIMETR PART ? (COMMAND + 8)
Partially Turn On the Perimeter
Description
This function is used to turn on the perimeter of your building while selected portions of the perimeter remain turned off. Perimeter points that are not secure (faulted) when this function is entered are automatically bypassed and are not included in the system. This function does not turn on the interior of your building. Entry/exit delays are provided with this arming command.
Use this function in residential systems to turn on the front of your house while the interior and the rear perimeter doors are left turned off, giving you freedom of movement between the house and patio.
In commercial systems, when you need access to the large overhead doors to receive deliveries, using this function will allow you to keep the rest of the building perimeter armed.
Using Perimetr Part:
1.The display shows disarmed idle text.
Press the COMMAND key. The display shows *System Command*.
2.Press the 8 key.
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the PERIMETR PART ?> prompt, press its adjacent soft key.
Press ENTER.
3.The display prompts the user to exit the area and starts counting down from 10 seconds to arm the system.
# is the number of seconds remaining, counting down from 10 seconds, before the system is armed.
Bosch Security Systems 9/04 50410D | 29 |
