D1260/D1260B Owner's Manual Part III: Advanced Commands - REMOTE PROGRAM ? (COMMAND + 4 + 3)
11.At the conclusion of the programming session your system sends a report to the security company and then returns your telephone to normal service and your display to idle text.
For systems with a phone number or network connection
My system uses a phone number for Remote Programming
My system uses an IP Address and network connection for Remote Programming
12.Ensure your keypad shows idle disarmed text.
13.Press the COMMAND key. The display shows *System Command*.
14.Press the 4 key then the 3 key.
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the REMOTE PROGRAM ?> prompt, press its adjacent soft key.
Press ENTER.
15.The display changes to show the two choices that are available for connecting to RAM:
•Contact RAM: RAM via phone or network
•Answer Now
16.Press the Contact RAM> soft key to specify the connection method to RAM.
17.Press either the RAM via phone> (to connect the panel to the RAM software via a
18.The display shows RAM connecting…
19.The security system will now call the telephone number or connect to the IP Address specified for network connection during the remote programming session.
20.At the conclusion of the programming session your system sends a report to the security company and then returns your telephone to normal service and your display to idle text.
Bosch Security Systems 9/04 50410D | 39 |
