D1260/D1260B Owner's Manual Part III: Advanced Commands - BYPASS A POINT? (COMMAND + 0)
| times. |
User Passcodes | A three to six digit number entered at a keypad to access the system. |
BYPASS A POINT? (COMMAND + 0)
Description
This command allows you to bypass points that you do not want included in the system. Points that are not included in the system do not detect intruders and cannot send any reports. You can bypass points when an area is disarmed. Bypassing a point reduces the level of security and should be used with discretion. Points remain bypassed until you unbypass them or some points may return when the area is disarmed. See Unbypassing a Point (COMMAND 00).
You could use COMMAND 0 to leave a window open over night without initiating an alarm. Also see Turning the System On With Doors or Windows Open.
Using Bypass a Point
1.The display shows disarmed idle text.
Press the COMMAND key. The display shows *System Command*.
2.Press the 0 key.
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the BYPASS A POINT ?> prompt, press its adjacent soft key.
Press ENTER.
3.You will prompted for your passcode. It will appear on the display as asterisks (*).
4.The display changes to show Enter point number or press next key.
Bosch Security Systems 9/04 50410D | 33 |
