D1260/D1260B Owner's Manual Part III: Advanced Commands - DEL USER ? (COMMAND + 5 + 3)
DEL USER ? (COMMAND + 5 + 3)
This function allows a user to be deleted.
This function will delete the passcode, Master User, and all
1.Ensure your keypad shows idle disarmed text.
2.Press the COMMAND key. The display shows *System Command*.
3.Press the 5 key and then the 3 key.
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the DEL USER ?> prompt, press its adjacent soft key.
4.The display changes to show Enter user # to be deleted:
Enter the user number, not the passcode. (123 is as an example.)
Press either the Enter> soft key or the ENTER button.
5.If the user number entered is a valid user in the system, the display will show Delete User 123? Are you sure?
(123 is as an example.)
If the user number entered is not a valid user in the system, the display will show This user is currently not in use.
6.Press the Yes> soft key to delete the user.
The display briefly shows that the user has been deleted before returning to idle text (123 is used as an example).
The user text is not deleted when deleting a user. To modify a user’s text, see Add/Change User (Command 56).
50 | Bosch Security Systems 9/04 50410D |
