D1260/D1260B Owner's Manual Part III: Advanced Commands - CHANGE DISPLAY (COMMAND + 4 + 9)
8.After selecting whether to disable or enable the level, the display prompts you again to enter an Authority Level to modify.
9.Press the <Exit soft key when you are finished.
CHANGE DISPLAY (COMMAND + 4 + 9)
This function presents three options:
•dim the display
•brighten the display
•continuously show the time and date in the display.
Brighten/Dim Display
You can change your keypad’s display to make the backlit LCD display bright or dim. When the display is dim, the tones are softer than when the display is bright. Use this option for keypads in bedrooms where a brighter display and louder tones could interfere with sleep.
If you dim the keypad backlit display and an alarm or trouble condition arises, the display automatically brightens and the volume increases. The backlit display returns to dim lighting when you clear the alarm or trouble condition.
Show Continuous Time/Date
Use this function to replace the disarmed idle text with a continuous time and date display and to prevent a passersby from knowing the status of your system.
Any time your keypad has an event to display, the time and date display is automatically removed. To return the time and date display, you must perform this function again.
1.Ensure your keypad shows idle disarmed text.
2.Press the COMMAND key. The display shows *System Command*.
3.Press the 4 and then the 9 key.
44 | Bosch Security Systems 9/04 50410D |
