D1260/D1260B Owner's Manual Part II: System Commands - MASTER ARM ? (COMMAND + 1)
Master Arming all Areas
If you prefer, you may use the Master Arm ?> command in the Command Menu to initiate this function which will arm all available areas according to your authority level.
1.The display shows disarmed idle text.
2.Press the MENU> soft key to enter the Command Menu,
3.then press NEXT> soft key repeatedly
4.until you reach the MASTER ARM ?> prompt. Press the soft key.
5.The display may prompt you to enter your passcode.
The passcode is shown as asterisks (*) when entered.
6.If there is more than one area that is set up, the option is given to arm all of them with MASTER ARM ALL ?
or by pressing the Next> soft key…
to view each unarmed area and optionally arm each one.
7.To arm a selected area, press Next> until the desired area appears (Area name text along with Arm Area # ?).
8.Then press Arm>
9.The next available area will appear with the option to arm it.
Every time the Next>,<Previous or Arm> soft keys are pressed, the display scrolls to the next unarmed area.
10.To arm all available areas, press the Arm> soft key when the display reads Master Arm All ?
11.The display changes to show that all areas are arming.
Depending on what areas are armed or areas that you have authority, 12345678 may or may not appear.
12.then displays Exit now # (# = exit delay time remaining).
After the exit delay time expires, the display changes to idle armed text.
20 | Bosch Security Systems 9/04 50410D |
