Friedrich PTAC operation manual Model Number Code, P H 07 K 3 S A

920-087-02 (9-03)

Announcing the Friedrich P-Series Packaged Terminal Air Conditioner.

A new approach to reliability and efficiency. A totally redesigned Friedrich PTAC.

Thank you for your decision to purchase the newly designed Friedrich Packaged Terminal Air Conditioner (PTAC). We are confident that you will find this unit a quiet and efficient example of Friedrich reliability.

This Installation and Operation Manual has been designed to insure maximum satisfaction in the performance of your unit. For years of trouble-free service, please follow the installation instructions closely. We cannot overemphasize the importance of proper installation. We have added new information to the basic instructions to help you achieve success.

Remember, proper installation is not difficult but it is essential.

Model Number Code

P H 07 K 3 S A 1

Series

P = P series

System
X=	Accessory
E=	Cooling with or

without electric heat H =Heat Pump with

Auxiliary Heat

Nominal Cooling Capacity
07	=	7,000	Btuh
09 =		9,000	Btuh
12	=	12,000	Btuh
15	=	15,000	Btuh

Engineering Digit

Design Series

Options

S = Standard

R= Remote Thermostat C = Seacoast Protection

X = Remote Thermostat and Seacoast Protection

Nominal Heater Size

(@ 230V or 265V)

0= No Heater

2 = 2.5 KW

3 = 3.4 KW

5 = 5.0 KW

Voltage

K= 230/208V - 1 Ph. - 60 Hz. R = 265V - 1 Ph. - 60 Hz.

Please read this manual thoroughly prior to equipment installation or operation. It is the installer’s responsibility to properly apply and install the equipment. Installation must be in conformance with the NFPA 70-2002 National Electric Code or current edition and Universal Mechanical Code current edition and applicable local or national codes.

3