Friedrich Friedrich PTAC Accessories continued, Pxde, Pxda, Pxft, Additional Accessories, Pxse

920-087-02 (9-03)

Friedrich PTAC Accessories (continued)

ADDITIONAL ACCESSORIES

MODEL NUMBER DESCRIPTION PHOTO

	SLEEVE EXTENSION RETROFIT KIT G-90 zinc coated
PXSE	steel, 2.4" sleeve extension attached to the room side of
	the sleeve to allow for the installation of a P-Series Friedrich
	PTAC in a T-Series sleeve.
	PXSE

	LATERAL DUCT ADAPTER Attaches to the PTAC/PTHP
	unit and provides a transition to direct up to 35% of the total
PXDA	CFM to a secondary room, either left or right of the unit. Kit
	includes duct plenum with discharge grille and internal baffle,
	adapter and end cap.
	LATERAL DUCT EXTENSION A three foot insulated plenum
PXDE	that attaches to the left or right side of the duct adapter. The
	extension can be cut to length by the installer. Maximum	PXDA
	allowable straight extension is fifteen feet.
PXFT	REPLACEMENT FILTER PACK These are original
	equipment return air filters. They are reusable and can be
	cleaned by vacuuming, washing, or blowing out, and are sold
	in convenient ten packs. (Two filters per chassis)
		PXFT

CHASSIS OPTIONS

DESIGNATORDESCRIPTION

SSTANDARD UNIT Standard PTAC/PTHP chassis. Can be 230/208V or 265V, electric or heat pump.

RREMOTE THERMOSTAT Chassis option necessary for wall mounted thermostat control of the unit.

SEACOAST PROTECTION Additional protection for PTAC/PTHP units in a coastal or corrosive environment.

C The entire outdoor coil is submerged in a specially formulated enamel coating, then oven-cured for a tough, corrosion-resistant finish.

23