Marantz CDR510 manual COPY protection, Copy Off, Copy On, How to turn COPY ON, OFF or to HCO

COPY protection

All pre-recorded audio CDs include a digital mark indicating the copy protection status of the disc. This information is stored in the user data area of the CD and is transmitted in the SPDIF format digital output.

Analog sources do not carry copy protection.

Because the CDR510 is a professional CD recorder, it will record from any digital source, ignoring the copy protection setting of the source material. The CDR510 allows you to set the level of copy protection of each disc you record.

COPY OFF

A CD recorded with COPY OFF allows unlimited digital copying. A consumer digital recording device can digitally record the CD.

COPY ON

A CD recorded with COPY ON allows a single generation digital copy for personal use. A consumer digital recording device will be able to digitally record the CD but the copy will have Copy Protection set to HCO so further digital copies cannot be made.

COPY HCO (Home Copy protected Original) A CD recorded with COPY HCO does not allow digital copying. A consumer digital recording device cannot digitally copy the CD.

How to turn COPY ON, OFF or to HCO

1.With the CDR drive selected push and re- lease the MENU/STORE button.

2.Turn the REC LEVEL/SELECT control until COPY is displayed.

1	2	3	4	5 6	7	8
ANALOG						CD-R	L	CD
							R

3.Push and release the REC LEVEL/SELECT control. ON, OFF or HCO is displayed.

1	2	3	4	5 6	7	8
						CD-R	L	CD
ANALOG							R

4.Turn the REC LEVEL/SELECT control to tab between ON, OFF and HCO.

5.When correct push and release the REC LEVEL/SELECT control. COPY is displayed again.

6.Turn the MENU/STORE button to switch to other menu choices or press and release the CANCL/DELETE button to exit menu mode.

- 35 -