CD |
|
| HOT(+) |
| CDR |
|
|
| THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. |
|
|
| |
ANALOG | DIG |
|
|
|
|
|
| OPERATION IS SUBJECT TO THE FOLLLOWING TWO CONDITIONS: |
|
|
| ||
|
|
|
|
| DIGITAL |
| (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, | MODEL NO. CDR510/U1B |
| ||||
| OUT |
|
| GROUND |
|
| AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE |
| |||||
OUT |
|
| RS232C | (SPDIF) |
| RECRIVED, INCLUDING INTERFERENCE THAT MAY CAUSE | AC120V 60HZ 0.5A |
|
| ||||
|
|
|
|
|
|
|
|
| UNDESIRED OPERATION. |
| M A R A N T Z A M E R I C A I N C . |
|
|
|
|
|
|
|
|
| LOOP |
| REMOTE |
| 1 1 0 0 M A P L E W O O D D R I V E |
|
|
|
|
| ANALOG |
|
|
| I T A S C A , I L 6 0 1 4 3 |
|
| ||||
| R | L | IN | OUT |
| OUT |
| (RC5) | SERIAL NO. | MADE IN JAPAN | AC IN | ||
L |
|
|
|
|
|
| COMPLIES WITH FDA RADIATION PERMORMANCE | ||||||
BALANCED | L |
|
|
|
|
|
| IN | STANDARDS, 21CFR SUBCHAPTER J |
| |||
| IN |
|
|
|
|
|
|
| EXT. |
| MANUFACTURED | FACTORY CODE |
|
| R - TRIM - L |
|
|
|
|
|
|
|
|
| NO 4300 |
| |
R | 0 +22 0 |
| R |
|
|
|
|
|
| OUT | MML | UL | CAUTION |
| +22 | INPUT |
|
| IN | OUT | IN | INT.(IR) |
| ||||
| (REF=+16dBu/0dBFS) | SELECT |
|
|
|
|
|
| WARNING: SHOCK HAZARD - DO NOT OPEN | US LISTED | RISK OF ELECTRIC SHOCK | ||
|
|
|
|
|
|
|
|
|
| AVIS : RISQUE DE CHOC ÉLECTRIQUIE - NE PAS OUVRIR. | AUDIO SYSTEM | DO NOT OPEN | |
|
|
|
|
|
|
|
|
|
|
|
| 69FM |
|
3
|
|
|
| HOT(+) | CDR | 5 |
|
|
|
|
|
| |
|
|
|
| GROUND |
| |
4 |
|
|
|
| ||
R |
| L | IN | OUT |
| |
| BALANCED | L |
|
| ||
|
| IN |
|
|
|
|
| R - TRIM - L |
|
|
|
| |
0 |
| 0 |
| R |
|
|
+22 | +22 | INPUT |
|
| ||
(REF=+16dBu/0dBFS) |
|
| ||||
SELECT |
| 6 | ||||
|
|
|
|
|
| |
3. BALANCED IN (continued)
The three pin XLR connection permits trimming, adjusting the input level. See TRIM (4).
The INPUT SELECT SWITCH (6) on the rear of the CDR510 must be to the left to select the BALANCED IN inputs. ANALOG must also be selected by pressing and releasing the INPUT button on the front of the CDR510 so ANALOG is
displayed.
ANALOG
Example |
|
| TOTAL |
|
display | 1 |
|
| CHANGER |
|
| L | CD | |
| ANALOG | R | ||
|
|
|
The pin out for the XLR jacks is printed on the CDR510 for easy reference:
ANALOG | 5. ANALOG IN / OUT | ||
IN | OUT | ||
jacks | |||
L |
| ||
| RCA jacks for line level | ||
|
| ||
|
| input and output to the | |
R |
| CDR drive. | |
L & R ANALOG IN jacks
Plug L and R RCA jacks in here to connect to the Line level output jacks of an external
The INPUT SELECT SWITCH (6) on the rear of the CDR510 must be to the left to select the BALANCED IN inputs. ANALOG must also be selected by pressing and releasing the INPUT button on the front of the CDR510 so ANALOG is displayed.
ANALOG
Example |
|
| TOTAL |
|
display | 1 |
| L | CHANGER |
| ANALOG | R | CD | |
|
|
|
L & R ANALOG OUT jacks
Plug L and R RCA jacks in here to connect to the Line level input jacks of an external
Pin 1 ground,
Pin 2 HOT +,
Pin 3 COLD
| R - TRIM - L | 4. TRIM R & L | |||
0 | +22 | 0 | +22 | You can use a small screw- | |
driver to adjust the TRIM of | |||||
|
|
|
| ||
IN
INPUT
SELECT
6.INPUT SELECT switch This switch selects between the BALANCED IN (XLR) jacks and the ANALOG IN (RCA) jacks for analog input for recording on the CDR drive.
(REF=+16dBu/0dBFS)
the XLR L & R inputs.
The TRIM is factory preset at +16 dBu with an adjustment range from 0 to +22 dBu.
Some professionals prefer to first set the TRIM using a meter and to do a fine adjustment by listening for distortion and watching the level meters on the CDR510.
ANALOG must also be selected by pressing and releasing the INPUT button on the front of the CDR510 so ANALOG is displayed.
- 23 -
