NEC ND-70895 (E) Commands, This section explains the commands in used in the OAI System

COMMANDS

Commands

3.Commands

This section explains the commands in used in the OAI System.

3.1List of Commands

Table 4-1shows a list of commands in use in the OAI system. As for any command other than those in the list, refer to the Feature Programming Manual and Office Data Specification of the NEAX2400 IMX.

	Table 4-1 OAI System Command Table List
ABBREV.	COMMAND
COMMAND
AADT	Assignment of Announcement/Dictation Trunks
ACNO	Assignment of Conversion Number Data
AKYD	Assignment of Key Data for Dterm
AMNO	Assignment of Monitored Number
AOAC	Assignment of OAI Access Code
AOKC	Assignment of OAI Key Code
ARNP Note 2	Assignment of Reverse Numbering Plan Data
ASPA	Assignment of Specific Attendant Number
ASYD
ASYDN	Assignment of System Data
ASYDL
DFLN	Display of Location Free Numbering
LADT Note 1	List Up of Announcement/Dictation Trunks
LCNO Note 1	List Up of Conversion Number Data
LMNO Note 1	List Up of Monitored Number
LOAC Note 1	List Up of OAI Access Code
LOKC Note 1	List Up of OAI Key Code

Note 1: Each command marked with * is used for listing up the assigned data, and thus its explanation will be omitted.

Note 2: For this command, refer to the Feature Programming Manual and Office Data Specification of the NEAX2400 IMX.

ND-70895 (E)CHAPTER 4

Page 27

Revision 1.0