NEC ND-70895 (E) system manual Aoac Assignment of OAI Access Code, Kind, Loac

COMMANDS

AOAC

AOAC: Assignment of OAI Access Code

16.Functions

This command is used to assign/delete the Facility Kind and the Operation Code on a basis of each service access code of the OAI System.

17.Precaution

(a)When setting a minus value (less than 0) to the parameter “OP-CODE”, add “-” (minus symbol) ahead to the value.

If the set value is a positive value, it is automatically interpreted to be a positive value even if “+” (plus symbol) is not added ahead of the value.

(b)For assigning OAI access codes, it is necessary to assign the necessary number of digits of OAI access codes by AOKC command in advance to assigning the codes.

18.Parameters

OAI-ACC : OAI Access Codes (000 ~ ###) (Max. 3 digits)

F-KIND	: Facility Kind (1 ~ 15)
	1: Terminal Mode Set Facility (MSF)
	2: Terminal Multiple Information Transfer Facility (TMF)
	3:	Not used
	15:
OP-CODE : Operation Codes (128~ 255)
	When F-KIND = 1, 128 ~ 191
	When F-KIND = 2, 192 ~ 255
19. Related Command
List Up :	LOAC

CHAPTER 4 ND-70895 (E)

Page 36

Revision 1.0