NEC ND-70895 (E) system manual Procedure for Setting Office Data for OAI Services

OFFICE DATA DESIGN

Procedure for Setting Office Data for OAI Services

3.Procedure for Setting Office Data for OAI Services

This section explains the outline, using conditions, and office data setting procedure of the main OAI service functions.

3.1 Switch Control Facility (SCF)

3.1.1Functional Outline

The SCF is the facility that executes, from the Application Program (AP), such control operations as connections/disconnections between NEAX2400 IMX-accommodate terminal (Dterm) and another, between a Dterm and a C.O. Line Outgoing/Incoming Trunk, etc. The SCF has several functions (FN), and explanations will be given in the following about “Basic Connecting Function (FN = 1) – Make Call (Automatic Answer)” which is one of the several functions.

Note: The basic connection function is a function which automatically set a terminal into an outgoing connection status. Responding to a connection request from the AP, both the calling terminal number and the call destination number can be designated.

Station Group

NEAX2400 IMX

Host Computer

[Application Program (AP]

CHAPTER 5 ND-70895 (E)

Page 62

Revision 1.0