NEC ND-70895 (E) system manual Akyd, Aokc, Aoac, Anpd, Aspa

OFFICE DATA DESIGN

Procedure for Setting Basic Office Data for OAI System

2.2 Data for OAI Terminal

In the case of Dterm

1. ASDT (In the case of Business; Station Data), AASP (In the case of Hotel system; Station Data) Note 1 Assign station data

Voice Port: TEC12 Data Port: TEC13 (Normal setting for others)

Note 1: For ASDT/AASP command, refer to the Command Manual of the NEAX2400 IMX.

2.	AKYD	(Dterm Key Data)
		Assign the function key data of Dterm
		Assign FKY34 – 47 to any positions of FKY 1–16.
		(Normal setting for others)
3.	AOKC	(OAI Key Code Data)
		Assign the OAI key code data
		OAI key code 1 ~ 14 respectively corresponds to FKY34 ~ 47 of AKYD
4.	AOAC	(OAI Access Code Data)
		If necessary, assign OAI access code data when using “OAI key + Access code” system to activate
		the application by MSF/TMF

In the case of Single-Line Telephone

1.ASYD (System Data)

Assign OAI Host Computer Respond Wait Timer

2.	ANPD	(Numbering Plan Data)
		Assign the minimum necessary number of digits for OAI Dial Number Continuous Transfer Code
		Note 2
3.	ASPA	(Special Access Code Data)
		Assign the OAI Dial Number Continuous Transfer Access Code
		SSCA: 69 (OAI Dial Number Continuous Transfer)
		NND : Necessary Number of Digits of OAI access code (Max. 3 digits)

Note 2: For ANPD command, refer to the Command Manual of the NEAX2400 IMX.

4. AOAC (OAI Access Code Data) Assign OAI access code data

ND-70895 (E)CHAPTER 5

Page 61

Revision 1.0