NEC ND-70895 (E) Aspa Assignment of Specific Access Code, Sida, Service Feature Index a

COMMANDS

ASPA

ASPA: Assignment of Specific Access Code

24.Functions

This command is used to assign/delete/display each data which respectively determines what kind of service should be executed and/or which route should be used, etc. when a special access code, C.O. line access code or Tie-Line access code has been dialed.

25.Precaution

(a)For the details of special access code data, refer to the description of ASPA command in the Feature Programming Manual and Office Data Specification for the NEAX2400 IMX. Explanations here will be limited only to the items pertaining to the OAI System.

(b)For assigning OAI Dial Number Batch Transfer (SRV = SSCA, SIDA = 69), be sure to set the number of digits (max. 3 digits) of the OAI access code to Necessary Number of Digits (NND).

26.Parameters

SIDA:	Service Feature Index A (69)
	69: OAI Dial Number Batch Transfer (TMF)

Note: For the details of other parameters, refer to the description of ASPA command in the Office Data Specification for the NEAX2400 IMX.

Specific Access Code Data Assign Table

The Office Data Sheets of this ASPA command are attached only to the pages pertaining to the data to be assigned in the OAI System. Replace these Office Data Sheets with those for ASPA command of the NEAX2400 IMX.

Table 4-2 Supplementary Service Codes

TENANT	ACCESS	CONNECTION		KIND OF
NUMBER	CODE	STATUS INDEX		SERVICE		SERVICE FEA-
(TN)	(ACC)		(CI)	(SRV)
						TURE INDEX A	REMARKS
1 ~ 31	1 ~ 3		N/H/B	SSCA		(SIDA)
	DIGITS
		N	Normal	SSCA	69		OAI Dial Number Batch Trans-
							fer (TMF)
		H	Hooking

CHAPTER 4 ND-70895 (E)

Page 42

Revision 1.0