NEC ND-70895 (E) system manual Amno Assignment of Monitored Number, Mno, Nmi, Ucd, Stn

COMMANDS

AMNO

AMNO: Assignment of Monitored Number

12.Functions

This command is used to assign/delete Monitored Numbers.

13.Precaution

Monitored Number (MON) is a number of maximum 5 digits consisting of 0 ~ 9, “*” and “#”.

Note that, in the case of a hotel system, UCD Pilot Number (STN) is a number of maximum 6 digits, respectively.

As NMI value, use a different value for each MON to be assigned.

14.Parameters

TN	:	Tenant Number
MNO	: Monitored Number (Max. 5 digits)
NMI	: Monitored Number Index (1 ~ 4095)
UCD	: Going by UCD when monitor status is not requested from AP
		0: Not going by UCD
		1: Going by UCD
STN	:	UCD Pilot Number (Max. 5 digits) Note
[In the case of Hotel System]
A/G	:	Designation of Administration/Guest Room
		A: For Administration
		G: For Guest Room

Note: Maximum 6 digits when using in a hotel system

15.Related Commands List Up: LMNO

CHAPTER 4 ND-70895 (E)

Page 34

Revision 1.0