NEC ND-70895 (E) system manual Mtc

COMMANDS

ASYD

System Data Assign Table (1)

The Office Data Sheets of this ASYD command are provided only for the data to be assigned in the OAI System. Use these Office Data Sheets together with those for ASYD command of the NEAX2400 IMX.

				BIT
SYSTEM	SYSTEM	DATA	CORRE-
	DATA		SPONDING
DATA		(DATA)
	INDEX			DATA			SYSTEM DATA CONTENTS
TYPE		00– FF
	(INDEX)
(SYS)		(Hex)
	0 – 255		DATA
					BIT
			0/1
			0			b0
			0			b1
			0			b2	Not used
			0			b3
	19		0			b4
							Call Event Transfer Facility (ETF) Call Base Table Save and ETF Ser-
						b5	vice is provided
							0/1: Unrequired/Required (3 hours)
			0			b6	Fixed to 0
			0			b7	Not used
						b0	Miscellaneous Timer Counter	Message sending Guard
1							(MTC)	Timer for Message Center
						b1
								Interface.
						b2	(00 ~ 1F Hex)	Guard Time after sending
						b3		data to Message Center:
								Time Value Setting is
						b4		(MTC) × 128 msec.
	28							(When this data is 00 Hex,
								Timer value is 0 msec.)
							Be sure to set “1” when using SSFR (FN = 5, SRID = 0)
						b5	MCI Message Waiting Lamp Function
							0/1: Not provided/Provided
			0			b6	Not used
			0			b7

CHAPTER 4 ND-70895 (E)

Page 44

Revision 1.0