NEC ND-70895 (E) system manual System Data Assign Table

COMMANDS

ASYD

System Data Assign Table (1)

				BIT
SYSTEM	SYSTEM	DATA	CORRE-
	DATA		SPONDING
DATA		(DATA)
	INDEX			DATA					SYSTEM DATA CONTENTS
TYPE		00– FF
	(INDEX)
(SYS)		(Hex)
	0 – 255		DATA
					BIT
			0/1
					b0	Data Port Chime Control by SCF
						0/1: To be controlled/Not to be controlled
					b1	Name Display Service
						0/1: 8 digits/16 digits
					b2	Call Status Monitor Facility Notification (SMFN)
						0/1: Invalid/Valid
	241
					b3	SCF Return Error Detail Notification
						0/1: Invalid/Valid
			0		b4
			0		b5	Not used
1			0		b6
			0		b7
					b0	Miscellaneous Timer Counter (MTC)				Value for OAI Host
										Computer Answer Wait
					b1
										Timer (TC) × (MTC) is to
					b2	1 ~ F				be set.
	251				b3
										When the data is 00 (Hex),
					b4	Timer Class (TC)
										the timer value becomes 8
						0:	–	3:	2 sec.6:–
					b5
										minutes. Note
						1:	64 msec.	4:	30 sec.7:–
					b6	2:	–	5:	–
			0		b7	Not used

Note: This timer data is exclusively for the function for batch transfer (TMF) of OAI dial number from a single- line telephone set. Therefore, this timer data is invalid for TMF from a Dterm.

CHAPTER 4 ND-70895 (E)

Page 50

Revision 1.0