NEC ND-70895 (E) system manual Aokc Assignment of OAI Key Code

COMMANDS

AOKC

AOKC: Assignment of OAI Key Code

20.Functions

This command is used to assign/delete the Facility Kind and the Operation Code on a basis of each function key on the Dterm.

21.Precaution

(a)The OAI code for which F-KIND = 3 (Open Application Interface) can be assigned is only one per system.

(b)When deleting the Open Application Interface (OAI) key code for which F-KIND = 3 is assigned, it is necessary, in advance to the intended deletion, to delete all the OAI access code data assigned by AOAC.

(c)When OAI key data has been assigned/deleted on basis of a function key by this command, operation of the OAI key is ignored only once immediately after that assignment/deletion or immediately after a system initialization.

22.Parameters

KEY-CODE:		OAI Key Codes (1 ~ 31) Note 1
F-KIND	:	Facility Kind (1 ~ 15)
		1: Terminal Mode Set Facility (MSF)
		2: Terminal Multiple Information Transfer Facility (TMF)
		3: Open Application Interface (OAI)
		4: Key Code Transfer Facility (KTF)
		5.		Not used
		15:
C-TONE	:	Chime control on normal end of MSF, TMF, and OAI
		0:	To be controlled
		1: Not to be controlled (No Tone)
NND	:	Necessary Number of Digits (1 ~ 3) Note 2
OP-CODE	:	Operation Codes Note 3
		(128 ~ 255)
		Operation
		Codes
		128		(0080)H: MSF	OAI
					(Terminal Mode Set Facility)
		191		(00BF)H: MSF
		192		(00C0)H: TMF	OAI
					(Terminal Multiple Information Transfer Facility)
		255		(00FF)H: TMF

CHAPTER 4 ND-70895 (E)

Page 38

Revision 1.0