INSTALLATION INSTRUCTIONS
These instructions cover the fitting of the Smoke Control Kit
1.PARTS LIST
•Smoke Control Air slider (Stovax Part No. ST5SCKIT)
2.Installation
2.1To install the Smoke Control kit:
•Remove internal packaging and Log Guard, Diagram 7
2.2• Remove the two bolts on the Airwash chamber These are located on the inside of the stove, Diagram 8
Inside the appliance
| Airwash |
|
|
|
|
|
| ||
| Airwash | |||
Chamber bolts | ||||
|
|
| Chamber bolt | |
2.3• Rotate and pull the Airwash chamber through the front of the appliance to remove, Diagram 9
2.4Replace the Airslider with the Smoke Control version, Diagram 10
Air slider
Airwash Chamber
2.5Fitting is the reverse of the above
2.6Ensure the Air slider screws are tightened to a tension that ensures movement when the Airwash is operated. The Air slider must be positioned correctly and not rest on the inlet, Diagram 11
Gap
Incorrect | Correct |
2.7Replace packaging
Airwash
Chamber
4
