USER INSTRUCTIONS
|
| 1. GENERAL |
|
1.1 | These instructions apply to Stockton 3/4/5/6/7 when fitted | ||
| with a Smoke Control kit. |
| |
| NOTE: These appliances have been independently tested to | ||
| PD6434 and approved by DEFRA as an exempted appliance | ||
| allowing it to burn wood in Smoke Control areas when fitted | ||
| with a Smoke Control kit. |
| |
|
|
| |
Product | Appliance | Smoke control kit | |
| Code |
| Part No. |
| 7125 | Stockton Inset Convector | ST5SCKIT |
1.2 | To meet the Smoke Control requirement this appliance must | ||
| be operated correctly in order to minimise the amount of | ||
| smoke produced. |
| |
1.3 | Burn only dry wood |
| |
1.4 | These instructions must be left with the user and kept with | ||
| the original instructions they superseded. | ||
2. RECOMMENDED FUELS
2.1 Wood Logs:
• Burn only seasoned timber with a moisture content of less than 20%
Appliance | Maximum Length | Maximum Diameter |
|
|
|
Stockton Inset | 325mm | 100mm |
Convector |
|
|
|
|
|
• Dry cut wood for 12 to 18 months before use
Poor quality timber:
—Causes low combustion efficiency
—Produces harmful condensation
—Reduces effectiveness of the airwash and life of the appliance
Do not burn construction timber, painted, impregnated / treated wood, manufactured board products or pallet wood.
3.Lighting the Appliance
3.1For best results:
•Set air controls, See below.
Stockton 7 
Air Wash: Fully Open 
Stockton 8
Primary Air: 25% Open 
Stockton 7 |
|
|
| Stockton 8 |
Secondary Air:
Fully Open
•Place firelighters or paper and dry kindling wood on the grate
•Light the paper or firelighters, See Diagram 2
•Leave the door slightly open as the fire establishes and the glass warms to avoid the
•Add larger pieces of wood
Too many logs may smother the fire.
Do not load fuel above the log guard and the secondary combustion inlets at the back of the firebox.
See Diagram 3
2
