D-Link DWS-3000 manual Example #2 show mac-address-table igmpsnooping

Wired Configuration Guide

Example #2: show mac-address-table igmpsnooping

(DWS-3024) #show mac-address-table igmpsnooping ?

<cr>	Press Enter to execute the command.
(DWS-3024) #show mac-address-table igmpsnooping
MAC Address	Type	Description	Interfaces
-----------------------	-------	------------	-----------
00:01:01:00:5E:00:01:16	Dynamic	Network Assist	Fwd: 0/47
00:01:01:00:5E:00:01:18	Dynamic	Network Assist	Fwd: 0/47
00:01:01:00:5E:37:96:D0	Dynamic	Network Assist	Fwd: 0/47
00:01:01:00:5E:7F:FF:FA	Dynamic	Network Assist	Fwd: 0/47
00:01:01:00:5E:7F:FF:FE	Dynamic	Network Assist	Fwd: 0/47

Example #3: set igmp (Global Config Mode)

(DWS-3026) (Config)#set igmp ?

<cr>	Press enter to execute the command.
groupmembership-interval	Configure IGMP Group Membership Interval
	(secs).
interfacemode	Enable/Disable IGMP Snooping.
maxresponse	Configure IGMP Max Response time (secs).
mcrtrexpiretime	Sets the Multicast Router Present Expiration
	time on the system.

(DWS-3026) (Config)#set igmp

Example #4: set igmp (Interface Config Mode)

(DWS-3026) (Config)#interface 0/2

(DWS-3026) (Interface 0/2)#set igmp ?

<cr>	Press enter to	execute the command.
fast-leave	Enable/Disable	Fast-Leave on a selected
interface
groupmembership-interval Configure IGMP		Group Membership Interval
(secs).
maxresponse	Configure IGMP	Max Response time (secs).
mcrtrexpiretime	Sets the Multicast Router Present Expiration
time on
	the system.
mrouter	Configure Multicast Router port.

(DWS-3026) (Interface 0/2)#set igmp

52 © 2001- 2008 D-Link Corporation. All Rights Reserved.