D-Link DWS-3000 manual CLI Examples, Example #1 Create Two VLANs, Example #2 Assign Ports to VLAN2

3 Virtual LANs

CLI Examples

The following examples show how to create VLANs, assign ports to the VLANs, and assign a VLAN as the default VLAN to a port.

Example #1: Create Two VLANs

Use the following commands to create two VLANs and to assign the VLAN IDs while leaving the names blank.

(DWS-3024) #vlan database

(DWS-3024) (Vlan)#vlan 2

(DWS-3024) (Vlan)#vlan 3

(DWS-3024) (Vlan)#exit

Example #2: Assign Ports to VLAN2

This sequence shows how to assign ports to VLAN2, specify that frames will always be transmitted tagged from all member ports, and that untagged frames will be rejected on receipt.

(DWS-3024) #config

(DWS-3024) (Config)#interface 0/1

(DWS-3024) (Interface 0/1)#vlan participation include 2

(DWS-3024) (Interface 0/1)#vlan acceptframe vlanonly

(DWS-3024) (Interface 0/1)#exit

(DWS-3024) (Config)#interface 0/2

(DWS-3024) (Interface 0/2)#vlan participation include 2

(DWS-3024) (Interface 0/2)#vlan acceptframe vlanonly

(DWS-3024) (Interface 0/2)#exit

(DWS-3024) (Config)#exit

(DWS-3024) #config

(DWS-3024) (Config)#vlan port tagging all 2

(DWS-3024) (Config)#exit

Example #3: Assign Ports to VLAN3

This example shows how to assign the ports that will belong to VLAN 3, and to specify that untagged frames will be accepted on port 0/4.

Note that port 0/2 belongs to both VLANs and that port 0/1 can never belong to VLAN 3.

(DWS-3024) #config

(DWS-3024) (Config)#interface 0/2

(DWS-3024) (Interface 0/2)#vlan participation include 3

(DWS-3024) (Interface 0/2)#exit

(DWS-3024) (Config)#interface 0/3

(DWS-3024) (Interface 0/3)#vlan participation include 3

(DWS-3024) (Interface 0/3)#exit

(DWS-3024) (Config)#interface 0/4

(DWS-3024) (Interface 0/4)#vlan participation include 3

(DWS-3024) (Interface 0/4)#exit

(DWS-3024) (Config)#

(DWS-3024) (Config)#exit

(DWS-3024) #config

(DWS-3024) (Config)#interface 0/4

(DWS-3024) (Interface 0/4)#vlan acceptframe all

CLI Examples 33