D-Link DWS-3000 manual Example 2 Add the physical ports to the port-channels

							6	Trunking (Link Aggregation)
(DWS-3024) #show port-channel all
	Port-			Link
Log.	Channel		Adm. Trap		STP		Mbr	Port	Port
Intf	Name	Link	Mode Mode		Mode	Type	Ports	Speed	Active
------ -------------		----- ---- ---- ------				-------	------ ---------		------
3/1	lag_10	Down	En.	En.	Dis.	Dynamic
3/2	lag_20	Down	En.	En.	Dis.	Dynamic

Example 2: Add the physical ports to the port-channels:

(DWS-3024) #config

(DWS-3024) (Config)#interface 0/2

(DWS-3024) (Interface 0/2)#addport 3/1

(DWS-3024) (Interface 0/2)#exit

(DWS-3024) (Config)#interface 0/3

(DWS-3024) (Interface 0/3)#addport 3/1

(DWS-3024) (Interface 0/3)#exit

(DWS-3024) (Config)#exit

(DWS-3024) #config

(DWS-3024) (Config)#interface 0/8

(DWS-3024) (Interface 0/8)#addport 3/2

(DWS-3024) (Interface 0/8)#exit

(DWS-3024) (Config)#interface 0/9

(DWS-3024) (Interface 0/9)#addport 3/2

(DWS-3024) (Interface 0/9)#exit

(DWS-3024) (Config)#exit

Example 3: Enable both port-channels.

By default, the system enables link trap notification

(DWS-3024) #config

(DWS-3024) (Config)#port-channel adminmode all

(DWS-3024) (Config)#exit

At this point, the LAGs could be added to the default management VLAN.

CLI Example 49