![](/images/new-backgrounds/1149832/149832179x1.webp)
Wired Configuration Guide
Enable VRRP on the port.
ip vrrp 20 mode exit
Using the Web Interface to Configure VRRP
Use the following screens to perform the same configuration using the Graphical User Interface:
To enable routing for the switch, use the LAN > L3 Features > IP > Configuration page.
Figure 42. IP Configuration
To enable routing for the ports and configure their IP addresses and subnet masks, use the LAN> L3 Features > IP > Interface Configuration page.
90 © 2001- 2008