Wired Configuration Guide

CoS Mapping Table for Trusted Ports

Mapping is from the designated field values on trusted ports’ incoming packets to a traffic class priority (actually a CoS traffic queue). The trusted port field-to-traffic class configuration entries form the Mapping Table the switch uses to direct ingress packets from trusted ports to egress queues.

Egress Port Configuration - Traffic Shaping

For slot/port interfaces, you can specify the shaping rate for the port, which is an upper limit of the transmission bandwidth used, specified as a percentage of the maximum link speed.

Queue Configuration

For each queue, you can specify:

•Minimum bandwidth guarantee

•Scheduler type - strict/weighted - Strict priority scheduling gives an absolute priority, with highest priority queues always sent first, and lowest priority queues always sent last. Weighted scheduling requires a specification of priority for each queue relative to the other queues, based on their minimum bandwidth values

•Queue management - tail drop

Queue Management Type

The D-Link DWS-3000 switch supports the tail drop method of queue management. This means that any packet forwarded to a full queue is dropped regardless of its importance.

CLI Examples

Figure 61 illustrates the network operation as it relates to CoS mapping and queue configuration.

Four packets arrive at the ingress port 0/10 in the order A, B, C, and D. You’ve configured port 0/10 to trust the 802.1p field of the packet, which serves to direct packets A, B, and D to their respective queues on the egress port. These three packets utilize port 0/10’s 802.1p to COS Mapping Table. In this case, the 802.1p user priority 3 was set up to send the packet to queue 5 instead of the default queue 3. Since packet C does not contain a VLAN tag, the 802.1p user priority does not exist, so Port 0/10 relies on its default port priority - 2 - to direct packet C to egress queue 1.

110 © 2001- 2008 D-Link Corporation. All Rights Reserved.

Page 109 Page 111
Page 110
Image 110
D-Link DWS-3000 manual Egress Port Configuration Traffic Shaping, Queue Configuration, Queue Management Type
Page 109 Page 111

DWS-3000 specifications

The D-Link DWS-3000 is an advanced cloud-ready wireless switch designed to meet the increasing demands of modern networks. As organizations transition to more mobile and connected environments, the need for robust and scalable networking solutions becomes paramount. The DWS-3000 addresses this need with its range of features, technologies, and specifications tailored for seamless network management.

One of the standout features of the DWS-3000 is its support for centralized management, allowing IT administrators to oversee multiple access points from a single interface. This simplifies the process of provisioning, monitoring, and troubleshooting network devices, ensuring optimal performance and minimizing downtime. The switch's intuitive web interface and support for D-View, D-Link's network management software, enable effective control over network operations.

The DWS-3000 is equipped with advanced security protocols to safeguard sensitive data within the network. It supports WPA3 encryption, which enhances security compared to its predecessor, WPA2. Additionally, features like MAC address filtering, 802.1X authentication, and rogue AP detection provide comprehensive protection against unauthorized access.

In terms of performance, the DWS-3000 leverages high-capacity hardware to support PoE (Power over Ethernet) technology, enabling power delivery to compatible devices without the need for additional cabling. This feature is particularly beneficial for deployment scenarios where cabling infrastructure is limited.

Moreover, the DWS-3000 is built with scalability in mind. It can support a vast number of access points, making it suitable for deployments ranging from small businesses to large enterprises. This scalability, combined with features like load balancing and Band Steering, ensures efficient use of available bandwidth, enhancing user experience.

The switch also offers seamless integration with D-Link’s suite of access points, allowing for simplified deployments in various environments, whether indoor or outdoor. The capabilities of the DWS-3000 extend into a comprehensive analytics engine, which provides insights into network performance and user behavior, aiding in informed decision-making.

With its blend of advanced features, robust security measures, and scalability, the D-Link DWS-3000 is positioned as a powerful solution for organizations looking to elevate their network infrastructure. It empowers businesses to provide reliable, high-performance wireless connectivity while maintaining security and ease of management in today’s dynamic environment.
Top Page Image Contents