D-Link DWS-3000 manual CLI/Web Examples Slot/Port Designations, Audience, CLI Documentation

Wired Configuration Guide

•Management

-RADIUS

-TACACS+

-DHCP Filtering

-Traceroute

-Configuration Scripting

-Outbound Telnet

-Pre-Login Banner

-Simple Network Time Protocol (SNTP)

-Syslog

-Port Description

CLI/Web Examples - Slot/Port Designations

To help you understand configuration tasks, this document contains examples from the CLI and Web Interfaces. The examples are based on the D-Link DWS-3000 switch and use the slot/port naming convention for interfaces, e.g. 0/2

Audience

Use this guide if you are a(n):

•Experienced system administrator who is responsible for configuring and operating a net- work using the D-Link DWS-3000 switch

•Level 1 and/or Level 2 Support provider

To obtain the greatest benefit from this guide, you should have an understanding of the Unified Switch. You should also have basic knowledge of Ethernet and networking concepts.

CLI Documentation

The DWS-3000 CLI Command Reference gives information about the CLI commands used to configure the switch. The document provides CLI descriptions, syntax, and default values.

Refer to the DWS-3000 CLI Command Reference for information on:

•

•

D-Link DWS-3000 switch command overview Command structure

16 © 2001- 2008 D-Link Corporation. All Rights Reserved.