Philips VR620/58 specifications Selecting onetime/daily/weekly recordings

SHOWVIEW
SHOWVIEW NUMBER	REP.
53124----	èONCE	p

________________________________

REP.pSELECT STOREpOK TIMER LISTpTIMER

3Enter the entire ShowView number. This number is up to 9 digits long and can be found next to the start time of the TV programme in your TV listings magazine.

e.g. 5-312-4 or 5 312 4

Enter 53124 for the ShowView-number.

If you make a mistake, you can clear your instructions with CLEAR (CL) .

Selecting onetime/daily/weekly recordings

Using SELECT , select from the following options: 'ONCE': Recording once

'MO-FR': Repeated daily recordings (Monday to Friday)

'WEEK.': Repeated weekly recordings (every week on the same day)

ENGLISH

TIMER

VPS

DATE REP. PROG. START PDC END

21 MO-FR 01 20:00 ] 21:30

________________________________

REP.pSELECT STOREpOK

4Confirm with OK .

aThe following message appears on the screen: 'SELECT PROG.

NR.'

b The programme number of the TV channel has not yet been assigned to the ShowView number. Using the number buttons 0..9 on the remote control, select the corresponding programme number (name) of the TV channel and confirm with OK .

aThe following message appears on the screen: 'SHOWVIEW NUMBER

NOT VALID'

b The entered ShowView number is incorrect. Correct your instructions or end with MENU .

b Check the time/date (see chapter 'Installing your video', section 'Setting the time and date').

aThe following message appears on the screen: 'MO-FR PROGRAMMING NOT POSSIBLE FOR WEEKEND'

b A daily recording was entered for the wrong day. Daily programming can only be used for recordings to be made from Monday to Friday.

5The decoded data appears after confirmation. You can go back to change the data. Select the corresponding input field using P or Q . Change the data with ;qP , P r= or with the number buttons 0..9 .

Switching on 'VPS/PDC' in the 'START' input field

Select the 'START' input field using P . Using SELECT switch on 'VPS/PDC' (']' lights up). If you press SELECT again, you will switch 'VPS/PDC' off (']' goes out).

6When all informations are correctly, confirm with OK . The programming information is stored in a TIMER block.

7 Insert a cassette with an intact security tab (unprotected).

Programming a recording (TIMER) 41