'Direct Record'
Can you record the right TV channel in seconds when the video recorder is switched off? No problem. If recording is started manually, the switched video recorder uses the current TV channel setted on the TV set.
You will find more information on how to switch 'Direct record' on or off in the next section 'Direct record'.
How does Direct Record work?
The video recorder compares the TV channel selected on the TV set with its stored TV channels via the scart cable. If the same TV channel is found, it switches the video recorder to the corresponding programme number and starts recording.
Please do not change the TV channel on the TV set during the search so as not to affect the process.
1On the TV set, select the programme number you want make the recording from.
2Press RECORD/OTR n with the video recorder switched off.
aA 'search symbol' appears in the display (a moving symbol)
b The video recorder is comparing its saved TV channels with those of the TV set. Please do not change the TV channel on the TV set as long as the 'search symbol' (a moving symbol) is being displayed.
a'NOTV' appears in the display
b This TV channel could not be found in the video recorder's memory. Check that all TV channels saved on the TV set are available in the video recorder. If required, save any missing channels. Please read the section 'Manual TV channel search'.
3 Stop recording with STOP h .
38 | Manual recording |
|
