Philips VR620/58 specifications Programming a recording with, Press Turbo Timer

BBC1

20:00

22:00

Programming a recording with

'TURBO TIMER'

With this function, programming a recording that takes place within the next 24 hours, will be quick and easy. The following pre-set information will appear in the display when you programme a recording using 'TURBO TIMER'.

Programme number = the programme number currently selected (TV channel) Start time = current time

End time = current time +2 hours

1Press TURBO TIMER on the remote control.

The current set programme number will appear in the display, for instance, 'PROG. 01'. If required, you can change this using ;qP or P r= .

a'CLK' will flash in the video recorder display

b This display means that the video recorder clock is not set correctly. Please read the section 'Setting the time and date' in chapter 'Installing your video recorder'

2Press TURBO TIMER .

The current time (= start time) will appear in the display, for instance, 'START 20:00'. If required, you can change this using ;qP or P r= .

3Press TURBO TIMER .

The end time will appear in the display, for instance, 'END 22:00'. 'END 22:00'. If required, you can change this using ;qP or P r= .

4Press TURBO TIMER .

'OK' will briefly appear in the video recorder display. Programming is now complete.

5Insert a cassette with an intact security tab (unprotected).

Using Tape List

Enter the cassette number with the number buttons 0..9 .

The cassette is being checked. You can find more information on the 'Tape

List' in the chapter 'Tape List'.

46 Programming a recording (TIMER)