C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX
(512)
PX412S
4 x 4 Matrix
Switch Module
The PX412S provides 16 independent latching DPST switches configured as a 4 x 4 matrix. These two wire switches have maskable interrupts that occur when the requested relay movements have been made. The module also has a FIFO for storing up to eight relay operations. This module is useful when instrument matrix switching is needed in your system.
This unit also features a position for adding one
Specifications:
Inputs:
Maximum Voltage (terminal to terminal or chassis) **
DC: | 60V / 200V |
AC rms: | 48V / 125V |
AC peak: | 68V / 175V |
Maximum Current
Per Switch/Per Module: |
| |
DC: |
| 2A / 8A |
AC peak: |
| 2A / 8A |
Maximum Power Per Switch/Per | ||
Module: |
|
|
DC: | 50W / 200W | |
AC: | 50VA / 200VA | |
DC Characteristics**: |
|
|
Thermal Offset: | <3_V (typical) | |
Contact Resistance: | <0.3_ | |
Insulation Resistance: | 10E8_ | |
** See manual for conditions
AC Characteristics:
Bandwidth
Crosstalk (typical)
<100 KHz: |
| |
<1 MHz |
| |
<10 MHz |
| |
Closed channel capacitance: | ||
<40 pF (typical) | ||
<60 pF (typical) | ||
<60 pF (typical) | ||
Typical Relay Life at Rated Load: | ||
| 10E5 operations | |
Time to close or open: | 8 ms | |
Connectors: |
| 44 pin DSUB |
|
| (female) |
Temperature: |
|
|
Operating: |
| 0°C to 55°C |
Storage: | ||
CPCI/PXI Compliance
Complies with PCI spec. 2.0 R3.0 and PCI spec 2.2
5V and 3.3V signaling voltage (VIO) supported
5V only power supply
33MHz PCI data bus
Five trigger lines compliant with PXI Specification 2.1
Form Factor: 3U
Applications
•LF Signal Switching
•Instrument Matrix with Kelvin switching
Ordering Information
Part Number |
Additional Information
Power: | +5V @ 0.6 A | User Manuals for C&H carriers and |
this module can be found on our |
website at www.chtech.com.
